C7 Corvette Stingray side vent Z51 OR Horsepower decal pair

You will either select Z51 or Horsepower decals. The price is for one pair of either Z51 or horsepower since you cannot put both of them there anyway. If you want to put the horsepower on your hood, then you need to order 2nd set. These letters will come in one piece application! Depending on color selection, some will be in 3M 1080, Oracal 970RA, or Avery Supreme which are all dry application but can also install wet as well. To do dry installation, it is super easy. Your decal will come in 1 piece with clear masking tape on top to hold all letters together. You can use your credit card for the job. For dry application: before peeling them off, use your credit card to squeeze on the clear masking tape again to make sure the clear masking is sticking well to the letters. Peel off the clear masking tape to pull up all the letter all together in 1 piece. Lay it on your rear spoiler at your liking placement (there is no right or wrong placement) lightly to make sure it is straight, etc … Since it is dry application, if you don’t be careful place it at the liking placement, you may not be able to pull it up and realign so be careful! If you place it at the correct placement, just use the credit card to squeeze it with a good pressure couple times. Peel off the clear masking tape 180 degrees off the surface and you are done. For wet application (Oracal 951 or Avery 950): before peeling them off, use your credit card to squeeze on the clear masking tape again to make sure the clear masking is sticking well to the letters. Please follow this instruction to install wet with premask.