Nemtek Wizord 4 Electric Fence Energizer 4 Joules The Wizard 4 electric fence Energizer Energizer 4 Joules is the logical choice for domestic and light industrial installations where a medium powered energizer is required. This generation of energizers has been field-tested for many years and boasts unsurpassed reliability. Simple to install and easy to maintain. • 3.7 Joule output energy (single zone) • Robust and flexible design for home and commercial security • Built-in alarm monitors tampering or faults on the high voltage and earth fence wires • Connectable to armed response radio or GSM module • Lightning and power surge protection Features of Wizord 4 Electric Fence Energizer Energizer 4 Joules High voltage monitor will alarm when the live wires are tampered with Earth wire monitor will alarm when the earth wires are tampered with Easy to use tag switch for controlling the unit Can be upgraded to a Merlin 4 energizer Connectable to an armed response radio Gate monitor input monitors the position of the gate to indicate if the gate is open Lightning and power surge suppression built-in to reduce the possibility of damage due to power surges Battery backup system in case of power failure Intelligent power saving to extend the battery life and save energy Siren and strobe outputs to indicate fence condition Specifications of Wizord 4 Electric Fence Energizer Energizer 4 Joules High Voltage Outputs Typical energy output into 500 ohms load (Joules) : 3.7J Output voltage into an open circuit :8000V Number of high voltage monitored zones : 1 Number of earth loop monitored zones : 1 Adaptive power technology (APT), reducing false alarms and arcing on the fence : No Fence Interference detection from foreign energizers : Yes Energizer Controls and Displays Keypads for the remote control of the energizer : No Tag switch – to control the energizer without using a keypad : Yes Remote on/off input : Yes Displays the output and return voltages : No Display type : LED Gate and Panic Button inputs Timed gate switch input, used to monitor open and closing of the gate : Yes Panic button input : Yes Alarm outputs Siren output, time programmable : Fixed Strobe light output to visually indicate an alarm condition : 1 Power supply and battery backup systems Mains supply voltage : 230V Typical power consumption under normal operating conditions : 18VA Internal battery backup system in case of power failure, capacity of battery : 7 Ah Typical standby time, with a fully charged battery : 36 Hours Solar power panels can be connected to power the energizers, (recommend Watt size for 24 hr operation) : 60 Watts Solar voltage regulator deep cycle battery size : 5 Amp Recommended in amp hours (20 % discharge over a 24 hr cycle) : 60 Ah Wire length for both solid and stranded wires Galvanised wires, 1.2mm Optimal performance up to : 3km Maximum : 5km Galvanised wires, 2.0mm,2.24mm Optimal performance up to : 4km Maximum : 10km Stainless Steel 1.0mm, 304 and316 grade Optimal performance up to : 0.6km Maximum : 0.9km Stainless Steel 1.2mm, 304 and316 grade Optimal performance up to : 0.7km Maximum : 1km Stainless Steel 1.6mm, 304 and316 grade Optimal performance up to : 1.4km Maximum : 2km Stainless Steel 2.0mm, 304 and316 grade Optimal performance up to : 2.1km Maximum : 3km Aluminium Wire 1.6mm and2.0mm Optimal performance up to : 8km Maximum : 16km Can be used in multi-energizer network system : No IEC 60335-2-76 : Yes CISPR 14, EN 61000 : Yes Dimensions(mm) : 180x205x120
