Nemtek Druid 15 LCD Electric Fence Energizer The Druid 15 LCD Electric Fence Energizer 5 Joule Using the Adaptive Power Technology (APT), this energizer offer a new and unique method in detecting how much power a fence can accept and handle before it starts to arc and waste energy. The APT actively analyses the fence and adapts the transfer of power as required to ensure maximum performance. The energizer ensures that the fence only receives the amount of power it can manage thus making it energy efficient and economical. Specifications High Voltage Outputs Typical energy output into 500 ohms load (Joules) : 4.6J Output voltage into an open circuit : 9000V High or low voltage modes, alarm monitoring is enabled in both modes. output voltage settings can be changed for both the high and the low voltage modes : Yes Number of high voltage monitored zones : 1 Number of earth loop monitored zones : 1 Adaptive power technology (APT), reducing false alarms and arcing on the fence : Yes Fence Interference detection from foreign energizers : Yes Energizer Controls and Displays Keypads for the remote control of the energizer : 2 max Tag switch – to control the energizer without using a keypad : Yes Remote on/off input : Yes Displays the output and return voltages : Yes Display type : LED Gate and Panic Button inputs Timed gate switch input, used to monitor open and closing of the gate : Yes Panic button input : Yes Alarm outputs Siren output, time programmable : Yes Strobe light output to visually indicate an alarm condition : 1 Power supply and battery backup systems Mains supply voltage : 230V Typical power consumption under normal operating conditions : 18VA Internal battery backup system in case of power failure, capacity of battery : 7 Ah Typical standby time, with a fully charged battery : 24 Hours Solar power panels can be connected to power the energizers, (recommend Watt size for 24 hr operation) : 60 Watts Solar voltage regulator deep cycle battery size : 5 Amp Recommended in amp hours (20 % discharge over a 24 hr cycle) : 60 Ah Wire length per energizer (live wires in a series system) for both solid and stranded wires Galvanised wires, 1.2mm Optimal performance up to : 5 km Maximum : 8 km Galvanised wires, 2.0mm,2.24mm Optimal performance up to : 5 km Maximum : 12 km Stainless Steel 1.0mm, 304 and316 grade Optimal performance up to : 0.7 km Maximum : 1 km Stainless Steel 1.2mm, 304 and316 grade Optimal performance up to : 0.8 km Maximum : 1.1 km Stainless Steel 1.6mm, 304 and316 grade Optimal performance up to : 1.6 km Maximum : 2.2 km Stainless Steel 2.0mm, 304 and316 grade Optimal performance up to : 2.4km Maximum : 3.3 km Aluminium Wire 1.6mm and2.0mm Optimal performance up to : 10 km Maximum : 20 km Can be used in multi-energizer network system : No IEC 60335-2-76 : Yes CISPR 14, EN 61000 : Yes Dimensions(mm) : 180x205x120
